Juventus F330 ( 250 / 400 watt )
- JUVENTUS range consists of an aluminium housing designed to incorporate low and medium wattage HID lamps and gear in symmetrical reflector system : tubular high pressure sodium SON-T 250 W, SON-T 400W and tubular metal halide HPI-T 250W, HPI-T 400W.
- Compact and sturdy IP 65 luminaire made of high grade die-cast aluminium (very low copper content).
- The housing is moreover covered by a black polyster powder coating applied after high grade specific surface pretreatment.
- Mounting bracket is of hot dip galvanized steel and all other external fixing elements (clips, screws, bolts, nuts,...) are of stainless steel.
- A 5 mm toughened front glass closes the luminaire by means of an efficient and safe 4-clip system.
- Lamp and gear are accessible from the front side of the fitting after removal of the glass which is held by the 2 hingeable bottom clips during maintenance operation.
- IP 65 ingress protection is secured thanks to the silicon gasket located between housing and glass and glued onto the housing.
- Class 1 floodlight (earthing required) available in 220 V 50 Hz.
- Mains cable entry one PG 13,5 cable gland.
- The floodlight is supplied with integrated control gear (for specific mounting situations where remote gear is necessary an empty E40 version is available).
- Floodlight suitable for indoor use at an ambient temperature (Ta) of 25°C.
- The reflector is made of pre-anodized (2 micron) aluminium sheet 0.5 mm thick and 99.85% purity, back reflector is hammered aspect side reflector in smooth aspect.
- U-shaped bracked for pole mounting from 60 mm diameter to 76 mm upon request.
|Clasification IP 65|
|Electrical insulation class I|
|Made to comply with IEC 598|
|Packing Qty||1 pc / box|
|Box Dimension (cm)||47.5 x 16 x 53.5|
|Gross Weight||10.9 kg|
|Net Weight||9.5 kg|