Flood Light
Juventus F330

Flood Light
Juventus F330

  • JUVENTUS range consists of an aluminium housing designed to incorporate low and medium wattage HID lamps and gear in symmetrical reflector system : tubular high pressure sodium SON-T 250 W, SON-T 400W and tubular metal halide HPI-T 250W, HPI-T 400W.
  • Compact and sturdy IP 65 luminaire made of high grade die-cast aluminium (very low copper content).
  • The housing is moreover covered by a black polyster powder coating applied after high grade specific surface pretreatment.
  • Mounting bracket is of hot dip galvanized steel and all other external fixing elements (clips, screws, bolts, nuts,...) are of stainless steel.
  • A 5 mm toughened front glass closes the luminaire by means of an efficient and safe 4-clip system.
  • Lamp and gear are accessible from the front side of the fitting after removal of the glass which is held by the 2 hingeable bottom clips during maintenance operation.
  • IP 65 ingress protection is secured thanks to the silicon gasket located between housing and glass and glued onto the housing.
  • Class 1 floodlight (earthing required) available in 220 V 50 Hz.
  • Mains cable entry one PG 13,5 cable gland.
  • The floodlight is supplied with integrated control gear (for specific mounting situations where remote gear is necessary an empty E40 version is available).
  • Floodlight suitable for indoor use at an ambient temperature (Ta) of 25°C.
  • The reflector is made of pre-anodized (2 micron) aluminium sheet 0.5 mm thick and 99.85% purity, back reflector is hammered aspect side reflector in smooth aspect. U-shaped bracked for pole mounting from 60 mm diameter to 76 mm upon request.
Packing Qty 1 pc / box
Box Dimension (cm) 47.5 x 16 x 53.5
Gross Weight 10.9 kg
Net Weight 9.5 kg
Clasification IP 65
Electrical insulation class I
Made to comply with IEC 598
  • JUVENTUS range consists of an aluminium housing designed to incorporate low and medium wattage HID lamps and gear in symmetrical reflector system : tubular high pressure sodium SON-T 250 W, SON-T 400W and tubular metal halide HPI-T 250W, HPI-T 400W.
  • Compact and sturdy IP 65 luminaire made of high grade die-cast aluminium (very low copper content).
  • The housing is moreover covered by a black polyster powder coating applied after high grade specific surface pretreatment.
  • Mounting bracket is of hot dip galvanized steel and all other external fixing elements (clips, screws, bolts, nuts,...) are of stainless steel.
  • A 5 mm toughened front glass closes the luminaire by means of an efficient and safe 4-clip system.
  • Lamp and gear are accessible from the front side of the fitting after removal of the glass which is held by the 2 hingeable bottom clips during maintenance operation.
  • IP 65 ingress protection is secured thanks to the silicon gasket located between housing and glass and glued onto the housing.
  • Class 1 floodlight (earthing required) available in 220 V 50 Hz.
  • Mains cable entry one PG 13,5 cable gland.
  • The floodlight is supplied with integrated control gear (for specific mounting situations where remote gear is necessary an empty E40 version is available).
  • Floodlight suitable for indoor use at an ambient temperature (Ta) of 25°C.
  • The reflector is made of pre-anodized (2 micron) aluminium sheet 0.5 mm thick and 99.85% purity, back reflector is hammered aspect side reflector in smooth aspect. U-shaped bracked for pole mounting from 60 mm diameter to 76 mm upon request.
Packing Qty 1 pc / box
Box Dimension (cm) 47.5 x 16 x 53.5
Gross Weight 10.9 kg
Net Weight 9.5 kg
Clasification IP 65
Electrical insulation class I
Made to comply with IEC 598
 

Get Your Catalog Here

 

See More


This post is also available in: idIndonesia (Indonesian)